Home : Sanitary Sewer > Definitions


Wastewater Control Commission Partnership

In the late 1970’s the Fox Lake Inland Lake Protection and Rehabilitation District was established. The first order of business was extensive water quality testing to determine the extent of pollution in the lake caused by failing septic systems. Upon completion of the necessary tests and many District and public informational meetings, it was decided that the area around the lake within the District boundaries should be served by a municipal wastewater collection system.

The District developed a facilities plan for treatment. This consisted of an aerated lagoon facility with a dual discharge to either surface water via a holding pond or a groundwater via land disposal. The District also submitted a facilities plan at about the same time which called for joint treatment (with the City of Fox Lake). It was determined that a joint treatment facility was about 20% less expensive than two separate facilities based on a 20-year cost effectiveness study.  The regulations which determined how grant monies were allocated required that the most cost effective alternative was chosen.  An alternative, which was not cost effective, was not grant eligible in order to conserve the limited grant funds available at the time.

The District was joined by the City in a joint treatment facility. DNR favored the single treatment facility for both the cost savings and because it would have two treatment facilities and two discharge sources in the same vicinity. Providing sewer service to the District would eliminate failing on-site systems which potentially contributed to lake pollution and could be a health hazard. Providing a new treatment facility for the City would address issues of their failing treatment plant.

Eventually a series of agreements were formulated and acted upon that eventually led to the formation of the Fox Lake Wastewater Control Commission. The treatment plant ownership was divided in a 40%-60% split (40% District and 60% City) based on anticipated future growth.  A six member Board of Commissioners was appointed (three District and three City). The plant was constructed, staff hired, and the District and City collection systems were connected to the new facility.
   

District Collection System

The District Wastewater collection system began construction in 1983 and was completed in 1985. The sanitary sewer piping is made of PVC.

Collection system statistics:

  • 130 Sanitary Sewer Manholes
  • 22,306 Feet of 8” Sanitary Sewer
  • 7,608 Feet of 10” Sanitary Sewer
  • 19 Lift Stations
  • 50 Grinder Pumps
     

Maintenance for the collection system is provided by the District operator. The operator is employed by the Wastewater Control Commission, paid for by the District through a quarterly sewer billing, and reports to the District Board of Commissioners. The District owns a pole building at the Treatment Plant that serves as a garage for our maintenance vehicle and storage area for equipment.

The operator is responsible for all collection system maintenance within the sewered area of the District. Some of the maintenance tasks include: televising of lines, jetting of forcemains, pigging forcemains, inspection of disconnections and reconnections, DNR required inspections, locating sewer lines, repairs to all system equipment, inspecting lift stations and grinder pumps, inspecting manholes, preparing an annual budget, and filing reports.

The District has hired the engineering firm of Ayers & Associates. They have prepared an assessment of the collection system and made recommendations for future growth.